Reward Points
:
919
£1,102.80
£919.00
Teledyne FLIR MR265 Thermal Imaging Moisture Meter
The Teledyne FLIR MR265 Thermal Imaging Moisture Meter is a pin/pinless moisture meter with a built-in 160 x 120px thermal imager and 2MP visual-light camera. It features Teledyne FLIR IGM (Infrared Guided Measurement) technology and supports MSX imaging. Up 15 000 images can be saved to the Teledyne FLIR MR265 Thermal Imaging Moisture Meter’s internal memory; these can be downloaded to Teledyne FLIR’s Studio Software for further analysis and/or to create reports. Electromagnetic/ capacitive pinless and pin probe resistive sensors enable the gathering of qualitative and quantifiable moisture measurements. Finally, the Teledyne FLIR MR265 Thermal Imaging Moisture Meter features a built-in work light and has been drop-tested from 2m. This thermal imaging pin/ pinless moisture meter with built-in torch is compliant with RESNET standards. It is ideal for building and facilities maintenance professionals.
Teledyne FLIR MR265 Thermal Imaging Moisture Meter Key Features
- Pin and pinless moisture meter equipped with thermal and visible-light cameras
- Ideal for building and facilities maintenance professionals
- Scan and investigate large areas for moisture, air leaks, and insulation voids without opening walls
- FLIR IGM (Infrared Guided Measurement) technology
- Built-in thermal camera
- IR resolution: 160 x 120px
- 2MP visible-light camera
- MSX imaging
- 2.8-inch display
- Internal memory: save up to 15 000 visual and radiometric thermal images
- Upload thermal images to FLIR's Thermal Studio Software for further analysis and/ or to create reports
- Electromagnetic/ capacitive pinless moisture sensor
- Pin probe resistive sensor
- RESNET standards
- Built-in work light
- Rugged
- Drop tested from 2m
- All-in-one thermal imager, pin and pinless moisture meter, and torch
What’s Included?
- Teledyne FLIR MR265 Thermal Imaging Moisture Meter
- Teledyne FLIR MR02 Standard Moisture Pin Probe
- Quick Start Guide
- International USB Charger
- USB Cable
- Lanyard
Teledyne FLIR MR265 Thermal Imaging Moisture Meter Technical Specifications
| Thermal Imaging | |
| Thermal image resolution | 160 × 120 (19,200 pixels) |
| Spectral response | 8 µm to 14 µm |
| Field of view (W × H) | 57° × 44° |
| Sensitivity | <150 mK |
| Object temperature Range | 0°C to 100°C (32°F to 212°F) |
| Emissivity correction | 3 pre-set and 1 custom emissivity setting |
| Image update speed frequency | 9 Hz |
| Image Modes and Displays | |
| Thermal image palettes | Iron, Rainbow, Arctic, White-hot, Black-hot |
| MSX® | Adds visual details to full resolution thermal image |
| Image modes | Thermal, Visual, MSX |
| Internal memory | 8 GB |
| Image gallery | Yes |
| Display type | QVGA (320 × 240 pixels) 2.8-in color TFT graphical display |
| Moisture Measurements | |
| Pin moisture range | 7% to 100% |
| Pin moisture accuracy | ±1.5%, 7% to 30%, Reference only: 30% to 100% |
| Pin moisture groups | 11 material groups |
| Pinless moisture range and accuracy | 0 to 100; relative |
| Pinless measurement depth | Max of 19 mm (0.75 in) |
| Measurement resolution | 0.1 |
| Response time pinless mode | 100 ms |
| Response time pin mode | 750 ms |
| General Information | |
| Saved image file format | Radiometric jpg |
| Stored image capacity | 15,000 Images |
| Digital camera | 2 MP |
| Digital camera field of view (FOV) | 83° (70.5° HFOV × 56° VFOV) |
| Language options | 22 |
| Laser type | Visible class 2, single laser pointer to centre of thermal image |
| Warranty | Limited 10-Year Warranty |
| Power System | |
| Continuous run time | 10 hours maximum |
| Typical usage | 4 work weeks |
| Auto power off | Programmable: off, 5, 10, 20 and 30 minutes |
| Battery | Rechargeable 3.7 V nominal, 5400 mAh LiPo |
| Certifications | |
| Certification standards | EN 61326 (EMC), EN 60825-1 Class 2 (laser), IEC61010-1 |
| Agency approvals | CE, RCM, FCC Part 15B, UKCA |
| Environmental and Physical Data | |
| Operating temperature | 0°C to 45°C (32°F to 113°F) |
| Storage temperature | -20°C to 60°C (-4°F to 140°F) |
| Operating humidity | 10% to 90% |
| Storage humidity | 90% relative humidity (no condensation) |
| Drop test | 2 m (6.6 ft) |
| Weight | 392 g (0.7 lb) |
| Size (L × W × H) | 17.7 × 8.9 × 3.6 cm (6.97 × 3.5 × 1.43 in) |
Reviews
Additional Information
| SKU | MR265 |
|---|---|
| Manufacturer Part Code | MR265 |
| Country of Origin | China |
